Drysuit with hood

Chest: 42+" / 107+ cm
Armpit to Armpit: 46" / 117 cm
Waist : 36" / 92 cm
Top of shoulder to wrist: 23" / 58.4 cm
Wrist to armpit: 23" / 58.4 cm
Shoulder to bottom edge: 31" / 79 cm

Neck (hooded jacket): 17" / 43 cm
Fore-head (hooded jacket): 21" / 53 cm

Chest: 46" / 116 cm
Waist : 44" / 112 cm
Top of shoulder to wrist: 25" / 63.5 cm
Shoulder to bottom edge: 39" / 99 cm

Neck (hooded jacket): 17" / 43 cm
Fore-head (hooded jacket): 20" / 51 cm

Standard-size facial opening

No facial opening in the hood. Please note that for safety and liability issues, there will be nose holes only to allow breathing if ordered with this option.

This hood has been chlorinated and polished with silicone. The thumbnail version has not been treated other than chlorination.

Waist: 33" / 83.8 cm
Hips: 37" / 95.8 cm
Inseam: 30" / 76.2 cm
Thigh: 21" / 55 cm
Knee: 17" / 43 cm
Ankle: 
Foot length: 10.5" / 26.7 cm
Shoe: US 5 1/2, UK 5, EU 37 1/2 (see photos with the size select option)

Height range from 5' 4" to 5' 9" (1.62m to 1.75m)

Waist: 34" / 86 cm
Hips: 37" / 94 cm
Inseam: 31" / 79 cm
Thigh: 23" /  58.5 cm
Knee: 17" / 43 cm
Ankle: 10" / 25.5 cm
Foot length: 11" / 28 cm
Shoe: US 9, UK 8 1/2, EU 43

Height range from 5' 9" to 6" / 1.75m to 1.82m

Waist: 36" / 92 cm
Hips: 40" / 102 cm
Inseam: 32" / 81 cm
Thigh: 26" / 66cm
Knee: 18" / 45cm
Ankle: 11" / 28 cm
Foot length: 11 1/2" / 29 cm
Shoe: US 12, UK 10, EU 44

Standard weight thickness is approximately 0.030 inches (0.6mm-0.7 mm).

These products are manufactured by the dipping process so there may be some variation in the measured thickness between different areas of the garments. The thicknesses offered as options are approximate in nature and may not always be exact. In most cases, we'll try to get an average thickness that reflects the desired weight. There should not be a great deal of variation between the thickest portion compared to the thinnest portion but some variation will naturally occur.

Heavyweight thickness is approximately 0.040 inches (0.8mm-1.0mm),

These products are manufactured by the dipping process so there may be some variation in the measured thickness between different areas of the garments. The thicknesses offered as options are approximate in nature and may not always be exact. In most cases, we'll try to get an average thickness that reflects the desired weight. There should not be a great deal of variation between the thickest portion compared to the thinnest portion but some variation will naturally occur.