Please see below...

Welcome to Hydroglove.com!

Current status (September 23, 2022):

I just now received the word from the chemical analysis of the coagulant. "Dump it". OK, so a few more days to remix and fill the tank with new coagulant.

Thanks for your patience, understanding and sense of humor through this incredible delay.

Chuck

 

Ala Carte Suit Parts

Replacement parts for your vintage rubber frogman suit.

Attached surgeon's gloves  

Glove Size - Glove Size 6

Glove Size 6
Select

Surgeons glove not
available in this size.
Ambidextrous glove size is:
6 1/4" at the palm
5 1/8" at the wrist.
Industrial gloves not
available in this size.

Glove Size - Glove Size 7

Glove Size 7
Select

Surgeons glove size is:
7" at the palm.
6" at the wrist.
Ambidextrous glove size is:
6 3/4" at the palm
5 7/8" at the wrist.
 

Glove Size - Glove Size 8

Glove Size 8
Select

Surgeons glove size is:
7 1/2" at the palm.
6 1/2" at the wrist.
Ambidextrous glove size is:
7 1/4" at the palm.
6 1/2" at the wrist.
.

Glove Size - Glove Size 9

Glove Size 9
Select

Surgeons glove size is:
9" at the palm.
7 1/2" at the wrist.
Ambidextrous glove size is:
7 1/2" at the palm
6 1/2" at the wrist.
 

Glove Size - Glove Size 10

Glove Size 10
Select

Surgeons glove size is:
9 1/2" at the palm.
8" at the wrist.
Ambidextrous glove size is:
8 1/2" at the palm
6 3/4" at the wrist.
 

Glove Size - Glove Size 11

Glove Size 11
Select

Surgeons glove not
available in this size.
Ambidextrous glove not
available in this size.
Industrial gloves size is:
10 1/2" at the palm.
10" at the wrist.

Sleeve Length

Sleeve Length

Measure distance from your top of your shoulder to your longest finger tip on the same arm. Indicate whether measurement is in inches or centimeters. Examine the size chart and supply us with measurements named "Y" and "Z".

Color - Black

Black
Select
Black
Attached surgeon's gloves
$39.00
details
Bermuda Shorts  

Bermuda Size - Bermuda, Medium

Bermuda, Medium
Select

The measurements shown are of the basic garment laying flat on a table and being measured. Assume that normal comfortable wear is about 8-10% increase over below sizes for a standard thickness. So there is a range depending on your desired fit. Heavyweight thicknesses will have much less variation and sizes should be more carefully selected.

Waist 32" (86.4cm)
Upper Thigh 19" (48.2cm)
Lower Thigh (above knee) 13" (33.2cm)

Bermuda Size - Bermuda, Large

Bermuda, Large
Select

The measurements shown are of the basic garment laying flat on a table and being measured. Assume that normal comfortable wear is about 8-10% increase over below sizes for a standard thickness. So there is a range depending on your desired fit. Heavyweight thicknesses will have much less variation and sizes should be more carefully selected.

Waist: 33" (84 cm)
Upper: Thigh 22" ( 55.9 cm)
Lower Thigh (above knee): 14" (35.6cm)

Bermuda Size - Bermuda, X Large

Bermuda, X Large
Select

The measurements shown are of the basic garment laying flat on a table and being measured. Assume that normal comfortable wear is about 8-10% increase over below sizes for a standard thickness. So there is a range depending on your desired fit. Heavyweight thicknesses will have much less variation and sizes should be more carefully selected.

Waist: 36" (91.5cm)
Upper Thigh: 25" (63.5cm)
Lower Thigh (above knee): 17" (43.2cm)

Color - Black

Black
Select
Black

Thickness - Standard weight

Standard weight
Select

Standard weight thickness is approximately 0.030 inches (0.6mm-0.7 mm).

These products are manufactured by the dipping process so there may be some variation in the measured thickness between different areas of the garments. The thicknesses offered as options are approximate in nature and may not always be exact. In most cases, we'll try to get an average thickness that reflects the desired weight. There should not be a great deal of variation between the thickest portion compared to the thinnest portion but some variation will naturally occur.

Thickness - Heavyweight

Heavyweight

$20.00

Select

Heavyweight thickness is approximately 0.040 inches (0.8mm-1.0mm),

These products are manufactured by the dipping process so there may be some variation in the measured thickness between different areas of the garments. The thicknesses offered as options are approximate in nature and may not always be exact. In most cases, we'll try to get an average thickness that reflects the desired weight. There should not be a great deal of variation between the thickest portion compared to the thinnest portion but some variation will naturally occur.
 

Add to Cart
Bermuda Shorts
$69.00
details
Drysuit Pants  

Pant Size - Pants, Medium

Pants, Medium
Select

Waist: 33" / 83.8 cm
Hips: 37" / 95.8 cm
Inseam: 30" / 76.2 cm
Thigh: 21" / 55 cm
Knee: 17" / 43 cm
Ankle: 
Foot length: 10.5" / 26.7 cm
Shoe: US 5 1/2, UK 5, EU 37 1/2 (see photos with the size select option)

Height range from 5' 4" to 5' 9" (1.62m to 1.75m)

Pant Size - Pants, Large

Pants, Large
Select

Waist: 34" / 86 cm
Hips: 37" / 94 cm
Inseam: 31" / 79 cm
Thigh: 23" /  58.5 cm
Knee: 17" / 43 cm
Ankle: 10" / 25.5 cm
Foot length: 11" / 28 cm
Shoe: US 9, UK 8 1/2, EU 43

Height range from 5' 9" to 6" / 1.75m to 1.82m

Image of foot of L pants

Pant Size - Pants, X Large

Pants, X Large
Select

Waist: 36" / 92 cm
Hips: 40" / 102 cm
Inseam: 32" / 81 cm
Thigh: 26" / 66cm
Knee: 18" / 45cm
Ankle: 11" / 28 cm
Foot length: 11 1/2" / 29 cm
Shoe: US 12, UK 10, EU 44

Height range: 5' 9" to 6' 2" / 1.75m to 1.87m

Pant Size - Pants, XX Large

Pants, XX Large

$10.00

Select

Waist: 40" / 96 cm
Hips: 42" / 106 cm
Inseam: 35" / 89 cm
Thigh: 28" /  71cm ???
Knee: 18" / 57 cm
Foot Length: 13" / 34 cm
Shoe: ???

Height range: 6' to 6' 4" / 183 cm to 193 cm

 

Color - Black

Black
Select
Black

Thickness - Standard weight

Standard weight
Select

Standard weight thickness is approximately 0.030 inches (0.6mm-0.7 mm).

These products are manufactured by the dipping process so there may be some variation in the measured thickness between different areas of the garments. The thicknesses offered as options are approximate in nature and may not always be exact. In most cases, we'll try to get an average thickness that reflects the desired weight. There should not be a great deal of variation between the thickest portion compared to the thinnest portion but some variation will naturally occur.

Thickness - Heavyweight

Heavyweight

$30.00

Select

Heavyweight thickness is approximately 0.040 inches (0.8mm-1.0mm),

These products are manufactured by the dipping process so there may be some variation in the measured thickness between different areas of the garments. The thicknesses offered as options are approximate in nature and may not always be exact. In most cases, we'll try to get an average thickness that reflects the desired weight. There should not be a great deal of variation between the thickest portion compared to the thinnest portion but some variation will naturally occur.
 

Add to Cart
Drysuit Pants
$120.00
details
Jacket with hood  

Jacket size - Jacket, Medium

Jacket, Medium
Select

Jacket size - Jacket, Large

Jacket, Large
Select

Chest: 42" / 107 cm
Waist : 36" / 92 cm
Top of shoulder to wrist: 21" / 53.5 cm
Shoulder to bottom edge: 31" / 79 cm

Neck (hooded jacket): 17" / 43 cm
Fore-head (hooded jacket): 20" / 51 cm

Jacket size - Jacket, X Large

Jacket, X Large
Select

Chest: 46" / 116 cm
Waist : 44" / 112 cm
Top of shoulder to wrist: 25" / 63.5 cm
Shoulder to bottom edge: 39" / 99 cm

Neck (hooded jacket): 17" / 43 cm
Fore-head (hooded jacket): 20" / 51 cm

Jacket size - Jacket, XX Large

Jacket, XX Large

$10.00

Select

Chest: 49" / 125 cm
Waist : 44" / 112 cm
Sleeve length (middle of back, around elbow to wrist): 35" / 90 cm
Bicep/Upper Arm: 16 1/2" / 42 cm
Shoulder to bottom edge: 40" / 102 cm

Neck (hooded jacket): 18" / 45.5 cm
Forehead (hooded jacket): 20" / 51 cm
 

Facial Opening Size - Facial Opening, Standard

Facial Opening, Standard
Select

Standard-size facial opening

Facial Opening Size - Facial Opening, Medium

Facial Opening, Medium
Select
Medium-size facial opening

Facial Opening Size - Facial Opening, Small

Facial Opening, Small
Select
Small-size facial opening

Facial Opening Size - Facial Opening, None

Facial Opening, None
Select

No facial opening in the hood. Please note that for safety and liability issues, there will be nose holes only to allow breathing if ordered with this option.

This hood has been chlorinated and polished with silicone. The thumbnail version has not been treated other than chlorination.

Thickness - Standard weight

Standard weight
Select

Standard weight thickness is approximately 0.030 inches (0.6mm-0.7 mm).

These products are manufactured by the dipping process so there may be some variation in the measured thickness between different areas of the garments. The thicknesses offered as options are approximate in nature and may not always be exact. In most cases, we'll try to get an average thickness that reflects the desired weight. There should not be a great deal of variation between the thickest portion compared to the thinnest portion but some variation will naturally occur.

Thickness - Heavyweight

Heavyweight

$20.00

Select

Heavyweight thickness is approximately 0.040 inches (0.8mm-1.0mm),

These products are manufactured by the dipping process so there may be some variation in the measured thickness between different areas of the garments. The thicknesses offered as options are approximate in nature and may not always be exact. In most cases, we'll try to get an average thickness that reflects the desired weight. There should not be a great deal of variation between the thickest portion compared to the thinnest portion but some variation will naturally occur.
 

Color - Black

Black
Select
Black
Jacket with hood
$130.00
details
Jacket with neck-seal  

Jacket size - Jacket, Large

Jacket, Large
Select

Chest: 42" / 107 cm
Waist : 36" / 92 cm
Top of shoulder to wrist: 21" / 53.5 cm
Shoulder to bottom edge: 31" / 79 cm

Neck (hooded jacket): 17" / 43 cm
Fore-head (hooded jacket): 20" / 51 cm

Jacket size - Jacket, Medium

Jacket, Medium
Select

Jacket size - Jacket, X Large

Jacket, X Large
Select

Chest: 46" / 116 cm
Waist : 44" / 112 cm
Top of shoulder to wrist: 25" / 63.5 cm
Shoulder to bottom edge: 39" / 99 cm

Neck (hooded jacket): 17" / 43 cm
Fore-head (hooded jacket): 20" / 51 cm

Jacket size - Jacket, XX Large

Jacket, XX Large

$10.00

Select

Chest: 49" / 125 cm
Waist : 44" / 112 cm
Sleeve length (middle of back, around elbow to wrist): 35" / 90 cm
Bicep/Upper Arm: 16 1/2" / 42 cm
Shoulder to bottom edge: 40" / 102 cm

Neck (hooded jacket): 18" / 45.5 cm
Forehead (hooded jacket): 20" / 51 cm
 

Thickness - Standard weight

Standard weight
Select

Standard weight thickness is approximately 0.030 inches (0.6mm-0.7 mm).

These products are manufactured by the dipping process so there may be some variation in the measured thickness between different areas of the garments. The thicknesses offered as options are approximate in nature and may not always be exact. In most cases, we'll try to get an average thickness that reflects the desired weight. There should not be a great deal of variation between the thickest portion compared to the thinnest portion but some variation will naturally occur.

Thickness - Heavyweight

Heavyweight

$20.00

Select

Heavyweight thickness is approximately 0.040 inches (0.8mm-1.0mm),

These products are manufactured by the dipping process so there may be some variation in the measured thickness between different areas of the garments. The thicknesses offered as options are approximate in nature and may not always be exact. In most cases, we'll try to get an average thickness that reflects the desired weight. There should not be a great deal of variation between the thickest portion compared to the thinnest portion but some variation will naturally occur.
 

Color - Black

Black
Select
Black
Jacket with neck-seal
$110.00
details
Wader Pants  

Pant Size - Pants, Medium

Pants, Medium
Select

Waist: 33" / 83.8 cm
Hips: 37" / 95.8 cm
Inseam: 30" / 76.2 cm
Thigh: 21" / 55 cm
Knee: 17" / 43 cm
Ankle: 
Foot length: 10.5" / 26.7 cm
Shoe: US 5 1/2, UK 5, EU 37 1/2 (see photos with the size select option)

Height range from 5' 4" to 5' 9" (1.62m to 1.75m)

Pant Size - Pants, Large

Pants, Large
Select

Waist: 34" / 86 cm
Hips: 37" / 94 cm
Inseam: 31" / 79 cm
Thigh: 23" /  58.5 cm
Knee: 17" / 43 cm
Ankle: 10" / 25.5 cm
Foot length: 11" / 28 cm
Shoe: US 9, UK 8 1/2, EU 43

Height range from 5' 9" to 6" / 1.75m to 1.82m

Image of foot of L pants

Pant Size - Pants, X Large

Pants, X Large
Select

Waist: 36" / 92 cm
Hips: 40" / 102 cm
Inseam: 32" / 81 cm
Thigh: 26" / 66cm
Knee: 18" / 45cm
Ankle: 11" / 28 cm
Foot length: 11 1/2" / 29 cm
Shoe: US 12, UK 10, EU 44

Height range: 5' 9" to 6' 2" / 1.75m to 1.87m

Thickness - Standard weight

Standard weight
Select

Standard weight thickness is approximately 0.030 inches (0.6mm-0.7 mm).

These products are manufactured by the dipping process so there may be some variation in the measured thickness between different areas of the garments. The thicknesses offered as options are approximate in nature and may not always be exact. In most cases, we'll try to get an average thickness that reflects the desired weight. There should not be a great deal of variation between the thickest portion compared to the thinnest portion but some variation will naturally occur.

Thickness - Heavyweight

Heavyweight

$25.00

Select

Heavyweight thickness is approximately 0.040 inches (0.8mm-1.0mm),

These products are manufactured by the dipping process so there may be some variation in the measured thickness between different areas of the garments. The thicknesses offered as options are approximate in nature and may not always be exact. In most cases, we'll try to get an average thickness that reflects the desired weight. There should not be a great deal of variation between the thickest portion compared to the thinnest portion but some variation will naturally occur.
 

Color - Black

Black
Select
Black
Wader Pants
$120.00
details