Shorty dry suit

Chest 36" (91.5cm)

Waist 31" (79cm)

Hip 35" (89cm)

Shoulder to Crotch:

30" (76cm)

Chest 39" (99cm)

Waist 32" (81cm)

Hip 36" (91.5cm)

Shoulder to Crotch:

32" (81cm)

Chest 41" (104cm)

Waist 35" (89cm)

Hip 39" (99cm)

Shoulder to Crotch:

33" (84cm)

The measurements shown are of the basic garment laying flat on a table and being measured. Assume that normal comfortable wear is about 8-10% increase over below sizes for a standard thickness. So there is a range depending on your desired fit. Heavyweight thicknesses will have much less variation and sizes should be more carefully selected.

Waist 32" (86.4cm)
Upper Thigh 19" (48.2cm)
Lower Thigh (above knee) 13" (33.2cm)

The measurements shown are of the basic garment laying flat on a table and being measured. Assume that normal comfortable wear is about 8-10% increase over below sizes for a standard thickness. So there is a range depending on your desired fit. Heavyweight thicknesses will have much less variation and sizes should be more carefully selected.

Waist: 33" (84 cm)
Upper: Thigh 22" ( 55.9 cm)
Lower Thigh (above knee): 14" (35.6cm)

The measurements shown are of the basic garment laying flat on a table and being measured. Assume that normal comfortable wear is about 8-10% increase over below sizes for a standard thickness. So there is a range depending on your desired fit. Heavyweight thicknesses will have much less variation and sizes should be more carefully selected.

Waist: 36" (91.5cm)
Upper Thigh: 25" (63.5cm)
Lower Thigh (above knee): 17" (43.2cm)

Standard weight thickness is approximately 0.030 inches (0.6mm-0.7 mm).

These products are manufactured by the dipping process so there may be some variation in the measured thickness between different areas of the garments. The thicknesses offered as options are approximate in nature and may not always be exact. In most cases, we'll try to get an average thickness that reflects the desired weight. There should not be a great deal of variation between the thickest portion compared to the thinnest portion but some variation will naturally occur.

Heavyweight thickness is approximately 0.040 inches (0.8mm-1.0mm),

These products are manufactured by the dipping process so there may be some variation in the measured thickness between different areas of the garments. The thicknesses offered as options are approximate in nature and may not always be exact. In most cases, we'll try to get an average thickness that reflects the desired weight. There should not be a great deal of variation between the thickest portion compared to the thinnest portion but some variation will naturally occur.