Wader

Min. neck opening 12" (30.5cm)

Max trim to 19" (48.3cm)

CHEST 40" (101.6cm)

WAIST 33" (83.8cm)

INSEAM 30" (76.2cm)

FOOT US 5 1/2, UK 5, EU 37 1/2

WRIST SEAL TO CENTER OF BACK 34" (86.3cm)

Height range from 5' 4" to 5' 9" (1.62m to 1.75m)

Min. neck opening 12"(30.5cm)

Max trim to 20"(50.8cm)

CHEST 46"(116.8cm)

WAIST 36"(91.5cm)

INSEAM 32"(81.3cm)

FOOT US 9, UK 8 1/2, EU 43

WRIST SEAL TO CENTER OF BACK  36"(91.5cm)

Height range from 5' 9" to 6"( 1.75m to 1.82m)

Min. neck opening 15 1/2" (39.4cm)

Max trim to 22" (55.9cm)

CHEST 48" (122cm)

WAIST 40" (101.6cm)

INSEAM 34" (86.3cm)

FOOT US 12, UK 10, EU 44

WRIST SEAL TO CENTER OF BACK 36" (91.5cm)

Height range from 5' 9" to 6' 2" ( 1.75m to 1.87m )

Standard weight thickness is approximately 0.030 inches (0.6mm-0.7 mm).

These products are manufactured by the dipping process so there may be some variation in the measured thickness between different areas of the garments. The thicknesses offered as options are approximate in nature and may not always be exact. In most cases, we'll try to get an average thickness that reflects the desired weight. There should not be a great deal of variation between the thickest portion compared to the thinnest portion but some variation will naturally occur.

Heavyweight thickness is approximately 0.040 inches (0.8mm-1.0mm),

These products are manufactured by the dipping process so there may be some variation in the measured thickness between different areas of the garments. The thicknesses offered as options are approximate in nature and may not always be exact. In most cases, we'll try to get an average thickness that reflects the desired weight. There should not be a great deal of variation between the thickest portion compared to the thinnest portion but some variation will naturally occur.
 

Reference the associated sizing chart and give us dimensions D, L, M, and T, please.

Clicking on the chart image will open the chart in a new, larger window.

Optional: Print the chart and completely fill it in then scan it and email the chart to us at info@hydroglove.com so we have a record of your dimensions.