Jacket with neck-seal

Chest: 42+" / 107+ cm
Armpit to Armpit: 46" / 117 cm
Waist : 36" / 92 cm
Top of shoulder to wrist: 23" / 58.4 cm
Wrist to armpit: 23" / 58.4 cm
Shoulder to bottom edge: 31" / 79 cm

Neck (hooded jacket): 17" / 43 cm
Fore-head (hooded jacket): 21" / 53 cm

Chest: 46" / 116 cm
Waist : 44" / 112 cm
Top of shoulder to wrist: 25" / 63.5 cm
Shoulder to bottom edge: 39" / 99 cm

Neck (hooded jacket): 17" / 43 cm
Fore-head (hooded jacket): 20" / 51 cm

Chest: 49" / 125 cm
Waist : 44" / 112 cm
Sleeve length (middle of back, around elbow to wrist): 35" / 90 cm
Bicep/Upper Arm: 16 1/2" / 42 cm
Shoulder to bottom edge: 40" / 102 cm

Neck (hooded jacket): 18" / 45.5 cm
Forehead (hooded jacket): 20" / 51 cm
 

Standard weight thickness is approximately 0.030 inches (0.6mm-0.7 mm).

These products are manufactured by the dipping process so there may be some variation in the measured thickness between different areas of the garments. The thicknesses offered as options are approximate in nature and may not always be exact. In most cases, we'll try to get an average thickness that reflects the desired weight. There should not be a great deal of variation between the thickest portion compared to the thinnest portion but some variation will naturally occur.

Heavyweight thickness is approximately 0.040 inches (0.8mm-1.0mm),

These products are manufactured by the dipping process so there may be some variation in the measured thickness between different areas of the garments. The thicknesses offered as options are approximate in nature and may not always be exact. In most cases, we'll try to get an average thickness that reflects the desired weight. There should not be a great deal of variation between the thickest portion compared to the thinnest portion but some variation will naturally occur.